Kathrein UFS 903 sw, Руководство по эксплуатации

Страница: 88 / 124

88
During the search you will see the
following display (example):
The newly found channels are identifi ed
with the suffi
x “New” (see example
screenshot on the right).
Note:
You can cancel the search at any time by
pressing the button.
Main menu - Channel search
- “free & scrambled” All channels are searched for
- “only free” Only free-to-air channels are searched for
- “only scrambled” Only encrypted channels are searched for
To view encrypted channels you need an appropriate CA (Conditional Access) module and
a valid smart card together with a valid subscription to the relevant Pay TV provider.
Network search
Use the buttons (On/Off) to select whether a network search should be performed. If you
set the network search to “Off”, only the factory default transponders for the satellite(s) you previously
selected will be searched for new as yet unsaved channels. If you set the network search to “On”, the
transponder network enables additional transponders that have not yet been stored to be located.
They are then stored and searched for new channels in the same way as the existing transponders.
Then use the buttons to switch to the fi eld “Start Search”. Pressing the button starts the
search.
After completion of the search, you will
see the following display (example):
Press the button.