Kathrein UFS 903 sw, Руководство по эксплуатации

Страница: 97 / 124

97
TV aspect ratio
Here you select the TV's picture format. Either
- 4:3 or
- 16:9
Picture format
Here you select the type of screen display,
depending on the setting of your TV format:
• Pan & Scan
• Letterbox
•
Automatically (only if the “16:9” TV format was
selected)
• Always 16:9 (only if the “16:9” TV format was
selected)
TV-SCART-Output
Select the type of video signal at the TV Scart
socket here. Select the signal that your TV set
can process.
- FBAS – Composite Colour Baseband Signal
- RGB – Red/Green/Blue signal or
- Y/C – S-Video signal (luminance/
chrominance)
HDMI Format
Here you can select the picture resolution that
will be sent to your TV set. Either
- 1080i (resolution 1920 x 1080, half-screen
images)
- 576p (resolution 720 x 576, full-screen
images)
- 720p (resolution 1280 x 720, full-screen
images) or
- automatically
Show 4:3 event
Here you can select the type of screen display
mode for 4:3 broadcasts on a 16:9 TV set:
- normal (Pillarbox)
- stretched (Full screen)
- zoom in (Pan & Scan)
By pressing the
$
(green) button once or
twice you can also call up the settings for
“Show 4:3 event” and for “HDMI Format”
whilst viewing.
Audio format via HDMI
Here you can select the type of audio signal
that is transmitted by the HDMI interface. Select
the signal that your TV set can process.
- Decoded PCM
- S/PDIF format
SCART HDMI or
Auto Dolby Digital output
Here you can select whether the receiver should automatically
output the Dolby Digital signal (if this is transmitted).
Audio delay (currently unavailable)
Here you can set a delay in milliseconds, if the sound output from your receiver is out of synch with the
TV picture (lip synchronicity). The delay can be set in 10 millisecond steps from 10 ms up to 200 ms.
Main menu - Settings
Subtitle
Here you can select whether the receiver should automatically
output the subtitles (if these are transmitted).