Kathrein UFS 903 sw, Руководство по эксплуатации

Страница: 90 / 124

90
Main menu - Channel search
Transponder Frequency
Use the buttons (transponder frequency already saved) or the number keys (transponder
frequency not yet saved) to select the transponder frequency on which the channel being sought is
broadcast.
The selection items: DVB Type, FEC, Polarisation and Symbol Rate need be entered only if
the transponder has yet to be saved.
DVB type
Press the buttons to select whether the search should be for standard channels (DVB-S (SD))
or for HDTV channels (DVB-S2 (HDTV)).
Modulation
Use the buttons to select the appropriate type of modulation. There is no need to input the type
of modulation when searching for standard channels. Instead a fi xed display of “Automatic” appears.
When searching for HDTV channels you must enter the correct type of modulation (either QPSK or 8PSK).
Polarisation
Press the buttons to select the correct polarisation (horizontal or vertical).
Symbol Rate
Use the number keys to enter the related symbol rate.
Channel Search Mode
Use the buttons to select whether you wish to search “free & scrambled”, ”only free” or
“only scrambled” channels.
To view encrypted channels you need an appropriate CA (Conditional Access) module and a
valid smart card together with a valid subscription to the relevant Pay TV provider.
Network Search
Use the buttons (On/Off) to select whether a network search should be performed. If you
set the network search to “Off”, only the factory default transponders for the satellite(s) you previously
selected will be searched for new as yet unsaved channels. If you set the network search to “On”, the
transponder network enables additional transponders that have not yet been stored to be located.
They are then stored and searched for new channels in the same way as the existing transponders.
Then use the buttons to switch to the fi eld “Start search”. Pressing the button starts the
search.