Kathrein UFS 903 sw, Руководство по эксплуатации

Страница: 110 / 124

110
Main menu - Service menu
Use the buttons to select “Manage
channel list”. Use the buttons to
switch to the “USB data carrier” line. If
several data carriers are connected to
the receiver, you can use the
buttons here to select the USB data
carrier on which the channel list to be loaded is held, or the USB data carrier on to which the current
channel list for your receiver should be stored/saved.
Load
Use the
@
buttons to switch to the “Load” line. Press the button. The following display appears:
Confi rm with the button. The channel list is being loaded. On completion the receiver
automatically skips back to the “USB device management” menu.
Loading the channel list
may take a few minutes.
Save
Use the
@
buttons to switch to the “Save” line. Press the button. The following display appears:
Confi rm with the button. The channel list is being saved. On completion the receiver automatically
skips back to the “USB device management” menu.
The receiver here offers you the option
of saving to a USB device the channel
list you are currently using, so that
you can recover it later if required.
Instructions on how to reload the
channel list can be found at the top of
this page (item “Load”).