Kathrein UFS 903 sw, Руководство по эксплуатации

Страница: 20 / 124

20
Connection and setup
Show 4:3 event
Here you can select the type of screen display
mode for 4:3 broadcasts on a 16:9 TV set:
- normal (pillarbox)
- Stretched (Full Screen) or
- Zoomed in (Pan & Scan)
Audio format via HDMI
Here you can select the type of audio signal
that is transmitted by the HDMI interface.
Select the signal that your TV set can process:
- Decoded PCM or
- S/PDIF format
Picture format
Select the type of screen display, depending
on your setting for the TV format:
- TV format “4:3”: Pan & Scan or Letterbox
- TV format “16:9”: Always 16:9 or automatic
TV-Scart-Output
Select the type of video signal at the TV Scart
socket here. Select the signal that your TV set
can process.
- CVBS – Colour Video Baseband Signal
- RGB – Red/Green/Blue signal or
- Y/C – S-Video signal (luminance/chrominance)
Press the
$
(green) button to move to the next menu.
System
Use the
@
buttons here to select the setting to match your reception system. You can set up the
tuner confi guration for the following types of reception systems:
- DiSEqC™1.0
- DiSEqC™1.1
- DiSEqC™1.2
- USALS
- One cable system
- Simple LNB
The settings for the tuner
confi
guration should be
performed by a specialist
engineer for this reception
system.
You should only perform the tuner
confi
guration yourself if you are fully
familiar with the particulars of your
reception system.
Continue as described in the fi rst installation for the type of reception you have selected.