manualshive.com logo in svg

Kathrein UFS 903 sw, Руководство по эксплуатации

Поделиться
Скачать
Kathrein UFS 903 sw Скачать руководство пользователя страница 74

74

Editing the channel list

Use the 

 buttons to select “Lock” 

and confi 

rm your selection with the 

 button.

To lock the channel you must now 
enter your four-digit PIN code (factory 
setting: 0000). The following display 
appears (see example screenshot on 
the right):
The locked channel is now displayed in 
the channel list with a padlock on the 
right hand side, and in future can only be 
viewed by inputting the four-digit PIN code 
(factory setting: 0000).

This function can be cancelled using the 
edit menu (select: “Unlock”).

Use the 

 buttons to select 

“To Favorite: ***”. Now use the 

 

buttons to select the desired favourites 
list (see example screenshot on the right), 
into which the channel should be copied. 

Confi 

rm your selection with the 

 

button.

The highlighted channel is copied into 
your selected Favourites List.

Содержание UFS 903 sw





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды