manualshive.com logo in svg

Kathrein UFS 900sw, Руководство по эксплуатации

Поделиться
Скачать
Kathrein UFS 900sw Скачать руководство пользователя страница 92

92

If you have misplaced your remote control, or if the batteries are 

fl

 at, you can still operate your receiver

(to a limited extent) from the front panel.

There are four buttons on the front of the receiver:

On/Off switch 

1)

:

This switch allows you to switch the receiver on and off again.

Channel down -:

The channel down button switches to the next channel down in the currently selected channel list.

Channel up +:

This button allows you to start the receiver and also to switch to the next channel up in the currently 
selected channel list.

Operation without the remote control

Because there are no numbered buttons, no password/PIN-protected functions 
can be displayed.

1)

The unit is not fully disconnected from the mains (see the sections “Safety Instructions - Important 
Notes” and “Periods of extended absence, thunderstorms, mains socket accessibility”)

Содержание UFS 900sw













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды