Kathrein UFS 900sw, Руководство по эксплуатации

Страница: 76 / 108

76
Channel Search Mode
Use the

buttons to select the type of channels that are to be searched for. You have three
options:
- “free and scrambled” All channels are searched for
- “only free” Only free-to-air channels are searched for
- “only scrambled” Only encrypted channels are searched for
To view encrypted channels you need an appropriate CA (Conditional Access) module and a
valid smart card together with a valid subscription to the relevant Pay TV provider.
Network search
Use the

buttons (On/Off) to select whether a network search should be performed. If you
set the network search to “Off”, only the factory stored transponders of the satellites you previously
selected will be searched for new as yet unlisted channels. If you set the network search to “On”, the
transponder network enables additional transponders that have not yet been stored to be located.
They are then stored and searched for new channels in the same way as the existing transponders.
Once you have performed all the settings, use the

buttons to switch to the “Start Search”
selection fi eld and con fi rm the start of the search using the

button.
The following displays during and in connection with the search are identical to those for the automatic
search.
Main Menu - Search Channels
After calling up the menu you will see
the following on-screen display:
The

buttons allow you to
select different sets of parameters for
the search.
Satellite
Use the

buttons to select the satellite that is transmitting the channels to be searched.
Make sure your reception system is aligned to this satellite.