Kathrein UFS 900sw, Руководство по эксплуатации

Страница: 14 / 108

14
Connection and setup
Before you start to use the UFS 900, read the sections “Safety Instructions -
Important Notes”, “Important Information” and “Connection and Set-Up” through to
the item “First installation”.
Do not connect the unit to the mains until all installation work has been properly
carried out.
The guidance provided in the “First installation” section assumes that the
receiver has been properly connected as per the “Safety Instructions - Important
Information” and “Connection and Set-Up” sections through to the “First
installation” section.
Required buttons on remote control for initial installation:

...

Numerical input

(green)
Proceed to next step in
the fi rst installation

(red)
Go back one step in the
fi rst installation

Con fi rm the changed
values/setting

Select/change individual
menu parameters, navigation

Cancel input, go back
First switch your TV set on and select the AV/HDMI input you have used to connect the receiver
to your TV set. Switch on the receiver at the power switch on the front of the unit. Undertake the
fi rst
installation. If you have any questions or encounter problems, contact your specialist dealer.
The following on-screen display appears:
Use the

buttons to select the desired menu language for your receiver and con fi rm your selection
using the

button. The selected language will be given a coloured background. The following languages
Always check the bar at the
bottom of the on-screen display.
This provides information on
what to do next.
T
ip!
T
ip!