Kathrein UFS 900sw, Руководство по эксплуатации

Страница: 73 / 108

73
After calling up the menu you will see
the following on-screen display:
You have three different search options:
- Automatic Channel Search
- Manual Channel Search
- Search with Service ID
Use the

buttons to select the
desired search type and con fi rm your
selection using the

button.
After calling up the menu you will see
the following on-screen display:
The

buttons allow you to
select different sets of parameters for
the search.
Satellite
Using the

buttons, select the satellite to be searched. Make sure your reception system is
aligned to the selected satellite. You can search only one satellite at a time. If you have connected
a multi-feed reception system (e.g. reception of ASTRA 19.2° East and HOTBIRD 13° East),
Main Menu - Search Channels
Automatic
Channel
Search All transponders for the satellite
you selected will be searched
Manual
Channel
Search Only the selected transponder for
the satellite you selected will be
searched
Search with
Service ID Search for a speci fi c channel
using its service ID
After a search (of whatever type) the receiver shows all newly found
channels in the channel list under the heading “New Channels”.
You will
fi nd this rubric in the channel list at the end of the green complete
list (select using the

buttons).
The channel list is called up on to the TV screen by pressing the

button
(see also section “Basic Functions”, “Channel selection from the channel
list”).
T
ip!
T
ip!