Kathrein UFS 900sw, Руководство по эксплуатации

Страница: 86 / 108

86
Use the

buttons to select the parameters to be updated during the update procedure.
Show infotext:
Press the

button to display the info text for the available downloads. These indicate the main
features of the new operating software, based on which you can decide whether you want to install the
new software on your receiver.
Update software:
Select “Yes” here if you want to install new software; select “No” if you are satis fi ed with your old
software version and the changes in the new software are not relevant to you.
Updating the channel list:
Select “Yes” here if you want to install the new channel list, or “No” if you want to retain your old
channel list.
If a new channel list is loaded, this will be automatically regenerated after each factory reset
(Restore Factory Default settings) (see “Mainmenu”, “Service Menu”, “Factory Reset”).
Once you have made all the settings for updating your receiver, switch to the “Start Update”
fi eld and
press the

button. The receiver will now automatically start updating the components you selected.
Follow all on-screen instructions!
Once the update is complete, the receiver is re-initialised and starts operation
again. Never turn off the receiver during the update process, as otherwise you
could lose the entire software. You would then need to re-install it in a workshop
or using a PC and network cable. You can use the Service menu to check
whether the new software has been installed.
Check the time setting following a software update!
You can also download the updates from the Internet. The address is:
www.kathrein.de. You will
fi nd the software under “Service”
→
“Software and
Downloads”
→
“Receiver”
→
“UFS 900”
You can also perform this update via the receiver’s USB port (see “Service Menu”,
“Software update”, “Software update over USB”).
Main Menu - Service Menu