Kathrein UFS 900sw, Руководство по эксплуатации

Страница: 13 / 108

13
Connection and setup
Connect the satellite receiver (HDMI or alternatively TV Scart socket) and the TV set using an HDMI or
Scart cable (see “Connection example”).
For system reasons, the same video signals are present at both the TV Scart socket and also the
video cinch output.
There are two ways you can access the digital audio.
HDMI
The stereo audio is transmitted to your TV set via the HDMI interface. If your TV set also supports
Dolby Digital, you can also receive the Dolby Digital audio via the HDMI interface (providing it is
broadcast by the channel provider). On this issue refer to the operating manual for your TV set.
S/PDIF Dolby Digital output
The S/PDIF output is intended for the connection of a Dolby Digital system (see “Advanced connection
example” in the technical appendix). Connect the S/PDIF output and the Dolby Digital system using an
appropriate cable.
If you want to play the sound on your hi- fi system, connect the audio cinch sockets to the input sockets
on the hi- fi system, using an appropriate cable (see “Advanced connection example” in the technical
appendix).
S/PDIF = Sony/Philips Digital Interface Format (digital output for Dolby Digital AC 3 audio)