Kanga 216 Series, Руководство оператора

Страница: 83 / 100

© 2022 Kanga Loaders.
79
Series 216 Loader
Operator’s Manual · Loader Specifications and Decals
Specifications: Series 2 Loader With Tracks
PERFORMANCE DT825
Tipping Load
1
(No Bucket) 552 kg 1214 lb
Tipping Load 1 (62kg Kanga GP bucket) 490 kg 1078 lb
Tipping Load
1
(84kg Kanga HD GP bucket) 468 kg 1029 lb
Tipping Load 1 (157kg Kanga 4in 1 GP bucket) 395 kg 869 lb
Rated Operating Capacity (ROC)
1
(No bucket) 248 kg 546 lbs
Maximum Travel Speed (Default Mode) 5.4 km/hr 3.4 m/h
Maximum Travel Speed (Fast Mode) 9.3 km/hr 5.8 m/h
Fuel Capacity (Diesel) 43 L 11.4 gal
Loader Mass
2
1056 kg 2328 lb
ENGINE
Manufacturer Kubota D902
Rated Power 3 17.5KW 23.5hp
DRIVE SYSTEM
Drive Control Soft Touch Hand Levers
Throttle Control Hand Levers
Tracks/Wheels with Direct Drive Hydraulic
Motor
Tracks
HYDRAULICS
Gear Pump Displacement 11.3 cc/rev 0.69 cu in/rev
Pump Output 40.6 L/min 10.73 US gal/min
System Pressure 220 bar 3200 PSI
Hydraulic Reservoir Capacity 92 L 24.3 US gal
BUCKETS
GP Bucket Capacity (heaped / struck)
4
0.12 m
3
/ 0.09 m
3
4.24 cu ft / 3.21 cu ft
HD 4-in-1 Bucket Capacity (heaped / struck)
4
0.13 m
3
/ 0.095 m
3
4.59 cu ft / 3.36 cu ft
DIMENSIONS
A Max Operating Height with 4in1 1100 HD
Bucket
2639 mm 10.3.90"
B Height to Hinge Pin 2098 mm 82.60"
C Overall Height (No Warning Lights) 1394 mm 54.88"
D Overall Length With 4in1 1100 HD Bucket 2353 mm 92.64"
E Overall Track or Wheel Width 1123 mm 44.21"
F Bucket Reach at 40º (4in1 1100 HD Bucket) 153 mm 6.02"
G Dump Height (4in1 1100 HD Bucket) 1381 mm 54.37"
H Bucket Width (4in1 1100 HD Bucket) 1090 mm 42.91"
I Bucket Max Roll Back 40°
J Bucket Max Dump Angle 59°
K Ground Penetration (4in1 1100 HD Bucket) 502 mm 19.76"
L Overall Length Less Bucket 1865 mm 73.42"
M Ground Clearance 196 mm 7.71"
N Angle of Departure 30°
Approach Angle With No Bucket 90°
Approach Angle With Bucket Rolled back 29.09°
1. Tipping load and Rated Operating Capacity (ROC) have been determined to ISO 14397-1, though the values shown here are for the material load and bucket mass combined. This is to
represent the general loader capabilities and cannot be used for material load without adjusting for the specific attachment. Referring to the section of this manual “Practice Safety at All Times”,
these adjustments have been made for a range of Kanga buckets and fork tynes. Note that ROC is 50% of the Tipping Load for wheel loaders and 45% for Kanga “over tire track” loaders.
2. Loader mass is the mass of the loader and fluids only. Specifically, this is the operating mass without the operator or bucket mass.
3. Power Rating is the net power of the production engine only as measured in accordance with SAE J 1349 at 3600 RPM. Mass production engines vary from this value. Actual power output for
the engine installed in the delivered machine may vary depending on numerous factors. These factors can include operation speed of the engine in the application, environmental conditions, and
other variables.
4. Volumes based on ISO 7546:1983.