Kanga 216 Series, Руководство оператора

Страница: 26 / 100

26
Series 216 Loader
© 2022 Kanga Loaders.
Operate Your Kanga Loader
Inspection After Delivery
As soon as your loader is delivered and before declaring it ready for use, thoroughly inspect it for any
evidence of damage resulting from shipment.
CAUTION
The task of preparing a new loader for use should be completed by a responsible person who has
read and understood this manual.
Care and maintenance requirements for your loader are simple, and coupled with the use of common
sense, a general occupational health and safety knowledge, and a daily prework visual inspection, should
not pose any problems. The following checklist provides suggestions for detecting defective or damaged
parts.
Check Before Using
1 Inspect the machine chassis for any visible damage.
2
Visually inspect all components to ensure they are securely attached.
3
Inspect all areas for evidence of hydraulic oil, engine oil, or fuel leakage.
4
Inspect arm assembly area for firm attachment and sufficient lubrication. Check hydraulic
cylinders for oil leakage and visible damage.
5 Check hydraulic oil lines for correct connections and for signs of leakage.
6
Check wheel and tire assemblies for loose or missing wheel nuts, any visible damage, and
proper tire inflation.
7
Check wheel drive motor assemblies for any visible damage and oil leakage.
8
Inspect all cylinders for rust, nicks, scratches, or foreign material on shafts. Check for
hydraulic oil leaks at the seal and fitting areas.
9
Inspect the engine compartment for loose or missing components and any evidence of
damage or leakage.
10
Check the engine oil level is within operating limits as marked on the dip stick.