Kanga 216 Series, Руководство оператора

Страница: 36 / 100

36
Series 216 Loader
© 2022 Kanga Loaders.
4-in-1 Attachment
Using the 4-in-1 Bucket
Connect to Blue and White couplings.
When collecting product from a heap or pile, lower
the arms all the way down until the arms touch the
bump stop. Then using your tilt lever roll forward
until the bucket is level with the ground. Drive the
bucket into the pile or heap. As the loader comes
to a stop, hold the drive levers forward and gently
roll the bucket back using the tilt lever towards the
operator. This process will make sure you have a
full load in your bucket. Using the tilt instead of
raising will decrease resistance and have more
break out force then trying to lift product out of the
pile or heap.
WARNING
When transporting material in the bucket
on slopes or rough ground, always keep the
bucket close to the ground. This lowers the
loader’s centre of gravity to maximize stability.
When scraping, leveling, and surface stripping,
lower the bucket to the ground and tilt it down.
Drive forward. The bucket will bite into the soil as
you move forward.
CAUTION
Do not step off the operator platform with the
load raised or the machine moving.
CAUTION
Always ensure that the attachment locking pins
are fully engaged at all times.
Important Safety Guidelines
Always attach, change or remove a bucket on
flat even ground. Loader operations involve rapid
movement and unpredictable direction changes.
Because of this, the working area must be kept
clear of bystanders and any personnel other than
the operator. To avoid accidents, the operator must
be vigilant at all times.
Establish and maintain a minimum 4-meter (12-
feet) exclusion zone around the working area. No
person other than the operator should enter the
work zone while the machine’s engine is running.
Observe all underground utility markings carefully.
Maintain a no-work zone 2 meters (6 feet) from any
utility marking.
Do not carry passengers, either on the machine or
an attachment.
DANGER
Do not place an object or body part between
the jaws of an open bucket or under the bucket
for any reason.
Operator’s Manual · Operate Loader Attachments