Kanga 216 Series, Руководство оператора

Страница: 14 / 100

14
Series 216 Loader
© 2022 Kanga Loaders.
Safe Work Practices—Pictograms
These illustrate key safety practices related to the operation of your Kanga Loader.
Descriptions
1 Caution: Take note of the following safe work
practices and safety notices. Always read the
operator’s manual before operating this machine.
2
Warning: Fall hazard
Safe Operation Angle: Do not operate machine on
slopes greater than 20 degrees.
Maneuver the machine slowly when turning.
Maneuver the machine slowly across rough
ground.
3
Danger: Electrocution hazard. Always check for
overhead and underground power services.
Keep 3 meters (10 feet) from overhead services
and 2 meters (6 feet) from on-ground utility
markings.
4
Caution: Entanglement hazard. Always keep both
feet on the standing platform and stand in an
upright position.
Only operating personnel may be present on the
machine. Never sit or ride on the side, top, or front
of the machine.
5 Tipping Hazard: Refer to operator’s manual for
Rated Operating Capacity (ROC). Use a steady,
even motion on the control levers; do not jerk the
control levers. Carry the heavy end uphill. Always
check behind you before reversing the machine.
Never overload the machine or exceed ROC.
Always operate the machine with the attachment
lowered.
Always move up and down slopes with the
attachment lowered.
6
Before any maintenance is performed, switch
engine off and remove the key. Never leave the key
in an unattended machine.
7 Caution: Entanglement hazard
Bystanders must be at least 4 meters (12 feet) from
the operating machine at all times.
8 Caution: Crushing hazard to feet and legs
Do not place feet under the standing platform.
Always keep both feet on the standing platform
while operating the machine. When stepping on or
off, keep feet clear of rear of machine by 0.5 meters
(1.6 feet).
9 No smoking, no fire, or open flame on or near this
machine.
10 Wear hearing and eye protection at all times during
operation of this machine.
10 9 8 7
5
6
4 3 2 1
Operator’s Manual · Safety Information