Kaisai Split ECO HOME, Руководство по эксплуатации

Страница: 16 / 38

Operation Instructions for Air-to-water Heat Pump Split ECO HOME Operation Instructions for Split Versati
13
SPLIT TYPE
(4) Save ”, a pop-up window will
pop up to remind if you are determined to save these settings. If so, press the OK key . If not, press
the Return key to not save these settings.
(5) , “ Weekly timer ” will be activated.
[Notes]
(a) Start time ” must be earlier than
“ End time ”. Similarly, the preceding period must be earlier than its following period.
(b) When “ Weekly timer ” has been set successfully, by changing “ ”, “ Water tank ”, “ Ctrl state ”, or
“ T-water ctrl ”, then the temperature set point for “ Weekly timer ” will be automatically changed to the set point
of last setting. For instance, if “
Heat
” is set for Monday of “
Weekly timer
”, “ ” is set to “
With
” and
the “ WOT-Heat ” is set 35°C in Weekly timer , by resetting “ ” to “ Without ”, then “ WOT-Heat ” will
be the value of last seting. In this case, if “ ” is set to “ Without ” for last setting, then “ WOT-Heat ”
will be changed to the default value (45°C) automatically. When Weekly timer is activated, “ WOT-Heat ” only
can be changed in Weekly timer but not in section 2.3 Parameter Setting .
(c) At the “ WEEKLY TIMER ” setting page there are totally three setting types for each day
“ √ ”: it indicates once the Week Timer is activated, the timer on this day is effective and will not be affected by the
“ Holiday ” mode.
“×”: it indicates even if the Week Timer is activated, the timer on this day is ineffective.
“
Holiday ”: it indicates when the Week Timer is activated but “ Holiday ” is not activated, then the timer on this
day is effective; when “Holiday” is also activated, the timer on this day is ineffective.
(d) When “ Weekly timer ” has already been set and the concerned modes include “ Hot water ”, if resetting