Operation Instructions for Air-to-water Heat Pump Split ECO HOME
Operation Instructions for Split Versati
12
SPLIT TYPE
precedence.
(e) When Sanitize is activated, “
Disinfection
” will show on the home page of the control until this operation is
Disinfect fail
” will show. In this case, by pressing any key, “
Disinfect fail
” will
be cleared or it will be always there.
(f) When Sanitize is activated, it will quit upon “
Communication error with the indoor unit
” or “
Water tank
heater error
”.
2.2.12 Weekly Timer
This function will make the unit run with certain modes in certain periods within a week based on the user’s
actual demand.
[Operation Instructions]
(1) At the homepage, by pressing the Function key
access to the
FUNCTION
page, and then locate
where “
Weekly timer
” is by switching pages, after that, press OK key
to go to the
WEEKLY TIMER
setting page.
(2) At the
WEEKLY TIMER
setting page, by the Right/Left key
it is able to select the desired week
day and then by the Up/Down key
to go to this day’s setting page.
(3) At the week day’s setting page, it is allowed to set the running mode (Mode), temperature set point (WT-
HEAT), and water tank temperature (T-Water Tank). The running mode includes “
Heat
”, “
Cool
”, “
Hot
water
”, “
Heat+ hot water
”, “
Cool+ hot water
” (the last three ones are available only when “Water tank” is
is able to set the “
Start time
” and “
End time
