Operation Instructions for Air-to-water Heat Pump Split ECO HOME
Operation Instructions for Split Versati
4
SPLIT TYPE
[Note]
"1*": it includes the “
Sanitize mode
”, “
Quiet
” mode, “
Auto
” mode, “
Floor debug
” mode, “
Emergen.mode
”,
“
Holiday mode
”, “
Forced Cooling
” mode, “
Forced Heating
” mode, and “
Debug
” mode.
2. Operation Instructions
2.1 On/Off
It is intended to turn on/off the unit.
[Operation Instructions]
At the homepage, by pressing the ON/OFF key
, the unit will be turned on/off.
When the unit is ON, the green indicating LED
located at the upper right of the control will light on. When
the unit is OFF, the green indicating LED
will light off. (
is just for reference.)
[Notes]
(a)
e.
(b) The ON/OFF key operation works only at the home page and the standby page.
(c) When the “
Holiday mode
” or the “
Emergen.mode
” is activated, the ON/OFF key
operation will
become ineffective.
(d) When the “
Forced Heating
” or “
Forced Cooling
” is activated, it will be deactivated by pressing the “ON/
OFF” key
, and then press the ON/OFF key
again to start the unit.
(e) ON/OFF operation will be memorized by setting “
Memory
” to be “
On
” at the “
GEN
.” setting page. That is, in
case of power failure the unit will resume running upon power recovery. Once “
On/off Memory
” is set to be “
Off
”,
in case of power failure the unit will keep “
Off
” upon power recovery.
(f) At the home page, the ON/OFF key
is intended to turn on/off the unit if applicable. The Function keys
no.1 to no.4 are corresponding to “
FUNC.
”, “
PAPA
”, “
VIEW
” and “
GEN.
” setting pages respectively.
(g) At the standby page, the Menu key
is used to back to the homepage, the ON/OFF key
is used
to turn on/off the unit if applicable, and all other key operations are ineffective.
(h) The control will return automatically to the homepage where there is no any key operation in 10 consecutive
minutes.