Operation Instructions for Air-to-water Heat Pump Split ECO HOME
Operation Instructions for Split Versati
18
SPLIT TYPE
(g)
at the Parameter View page.
(h) Before activating “
Floor debug
”, please make sure each period for “
Floor debug
” is not zero, or a dialog
box will pop up, warning “
Wrong Floor Debug time!
”. It will resume only by pressing “OK” and then correcting
the time.
m
p
.
eT
m
:
N 10
:
2~10
℃
T
T2
T3
T4
T5
(
3
)
(
4
)
(
N
)
∆
T
(
1
)
T1
T2
(
2
)
Time
t1
t2
t3
t4
tn
∆
t
0~72h (Min. 12h)
Floor Debug
Period 1 Temp
Segment Time
ΔT
Segments
2.2.17 Emergency Mode (Emergen. Mode)
When the compressor fails to run owing to some urgent condition, this function will allow the unit to run in the
“Heat” or “Hot water” mode through the auxiliary heater and the water tank heater.
[Operation Instructions]
(1) Set “
Mode
” to “
Heat
” or “
Hot water
” at the Parameter Set page
(2) Then, switch pages to go the page where “
Emergen. mode
”, locate it by the Left/Right key
, and
On
” or “
Off
.
(3) When it is set to “
On
”, “
Auxiliary func.
” at the homepage will be replaced by “
Emergen.
Mode
”.
(4) When it is set to “
On
” but the running mode is not “
Heat
” or “
Hot water
”, a dialog will pop up, warning “
Wrong
running mode!
”. In this case, by pressing the OK key
, the control will go to the Mode setting page,
or by pressing the Cancel key
, the control will return to the “
Emergen. Mode
” page.
[Notes]
(a) When the unit is performing “
Heat
and will not be allowed to be activated.
(b) When the unit is performing “
Hot water
activated.
(c)
operation will be disabled; the running mode will not be
allowed to be changed; the Quiet Mode and Weather-dependent Mode cannot be deactivated; “
Weekly timer
”,
“
Clock timer
” and “
Temp timer
” also cannot be activated, or will be deactivated if being activated.
(d)
(e)
Heat
” and “
Hot water
” is allowed.
(f) This function can be activated only when the unit is OFF, or a dialog box will pop up, warning “
Please turn
”
(g)
Floor debug
”, “
Sanitize
”, “
Holiday mode
”, cannot be activated, or a dialog