Kaisai Split ECO HOME, Руководство по эксплуатации

Страница: 20 / 38

Operation Instructions for Air-to-water Heat Pump Split ECO HOME Operation Instructions for Split Versati
17
SPLIT TYPE
been installed.
[Operation Instructions]
(1) At the homepage, by pressing the Function key access to the FUNCTION page, and then locate
where “ Floor debug ” is, after that, press OK key to go to the FLOOR DEBUG setting page.
(2) At the FLOOR DEBUG setting page, by the Left/Right key select the desired parameter and
then by the Up/Down key Segments ”, “ Period
1 temp ”, “ ΔT o f segment ”, and “ Segment time ”, as listed in the following table.
No. Full Name Displayed Name Range Default Accuracy
1 Segments 1~10 1 1
2 Period 1 temp 25~35°C/77~95°F 25°C/77°F 1°C/1°F
3
Segment temperature difference
Δ T of segment 0~72H 0 12H
4 Segment time 2~10°C/36~50°F 5°C/41°F 1°C/1°F
activate this function and a dialog
box will pop up, reminding “ Start the Floor Debug Mode now? ”. If so, press the “OK” key . Once “ Floor
debug ” has been activated, by pressing the function key no.2 , a dialog box also will pop up, reminding “ Stop
the Floor Debug Mode now? ” If so, press the OK key ; if not, press “ Cancel ” to go on.
[Notes]
(a) This function can be activated only when the unit is OFF. When it is intended to activate this function with
the unit being ON, a dialog box will pop up, warning “
”.
(b) When this function has been activated, it is unable to turn on or off the unit. In this case, when pressing the
ON/OFF key , a dialog will pop up, warning “ Please disable the Floor Debug Mode! ”.
(c) When this function has been set successfully, “ Timer week ”, “ Clock timer ” and “ Temp timer ” will be
deactivated.
(d) ”When “
Floor debug ” mode has been activated, “ Emergen.mode ”, “ Sanitize ”, “ Holiday mode ” is not
allowed to be activated, or a dialog box will pop up, warning “ Please disable the Floor Debug Mode! ”.
(e) Upon power failure, this function will be OFF and runtime will be cleared.
(f) At the
FlOOR DEBUG setting page, the control will remain at this page and never back to the homepage
unless pressing the Return key or Menu key .