Kaisai Split ECO HOME, Руководство по эксплуатации

Страница: 23 / 38

Operation Instructions for Air-to-water Heat Pump Split ECO HOME Operation Instructions for Split Versati
20
SPLIT TYPE
to “1” or “2” or “Off”.
[Notes]
It will be memorized upon power failure.
2.2.21 Other Heater
ntroller.
[Operation Instructions]
Go to the
FUNCTION
page and locate
Other heater
,
“ With ” or “ Without ”.
[Notes]
It will be memorized upon power failure.
2.2.22 Chassis Heater
The user will decide if to activate or deactivate the chassis heater. Generally it is suggested to activate it under
low environment temperature, “ Heat ” mode or “ Hot water ” mode to prevent the chassis from being frozen.
[Operation Instructions]
Go to the FUNCTION page and locate “ Chassis Heater ” then, configure it through the Up/Down key
, “
On
” or “
Off
”.
[Notes]
It will be memorized upon power failure.
2.2.23 Tank heater
When the water tank is installed, it is suggested to activate it. In this case, the water tank will go to the standby
status and will start after the control program has made this decision based on the actual demand and the
environment temperature.
[Operation Instructions]
Go to the FUNCTION page and locate “ Tank heater , “ On ”
or “ Off ”.
[Notes]
It will be memorized upon power failure.
2.2.24 Solar antifre
This function is for solar system freezing protection. It can be activated or deactivated by the user. Generally it
is suggested to activate it .
[Operation Instructions]
Go to the FUNCTION page and locate “ Solar antifre ,
“ On ” or “ Off ”.
[Notes]
It will be memorized upon power failure.
2.2.25 Water Tank
With ” or “ Without ” based on the actual condition.
[Operation Instructions]
Go to the FUNCTION page and locate “ Water tank ,
“ With ” or “ Without ”.
[Notes]
(a) It will be memorized upon power failure.