Operation Instructions for Air-to-water Heat Pump Split ECO HOME
Operation Instructions for Split Versati
16
SPLIT TYPE
(c) The allowed running modes include “
Heat
” and “
Cool
”
(d) When the start time of “
Period 2
” is equal to that of “
Period 1
”, then the set point of “
Period 2
” takes
precedence.
(e) TEMP. TIMER
is judged by the timer value.
(f) During the setting, the temperature set point which is set manually always takes precedence.
2.2.15 Solar kit
When the solar system is prepared (water tank and solar heater both are set to “with”), this function will
decide which period to let the solar system to run. However, if the solar system will run virtually depends on the
temperature difference between the solar panel and the water tank.
[Operation Instructions]
(1) After setting water tank and sloar heater, go to the FUNCTION page and locate “
Solar Kit
”, and then press
the
or
key it can be set to “
On
”, “
Off
”, or “
Timer
”. “
On
” means to activate the solar kit when
Off
” means to deactivate the solar kit; and “
Timer
” means to
Enter
”
at the lower left corner will go to the “
Solar Kit
” setting page, as shown below.
No.
Full Name
Displayed Name
Range
Default
1
Solar kit start time
Start time
0:00~23:59
8:00
2
Solar kit stop time
End time
0:00~23:59
18:00
(2) At the “
Solar Ki
t” setting page, press the up or down key
to locate “
Start time
” or “
End time
”
and then adjust them through the up and down keys.
(3) Then, press “
Save
” and then a dialog xo will pop up. In the dialog box, press “
OK
”
setting, or press “
Cancel
”
to cancel this setting.
(4) After that, this page will automatically back to the
FUNCTION
page with the cursor stayed at “
Solar Kit
”
and then through the up and down keys to set it to be “
On
” to time the solar time.
[Notes]
(a) Once the solar timer is timed; it cannot be canceled through ON/OFF operation but be done manually.
(b) “
Start time
” and “
End time
” will be memorized upon power failure
(c) It can be set under both ON and OFF states
2.2.16 Floor Debug
