KAESER ESD 352 SFC, Техническая документация инструкция

Страница: 232 / 413

Position Name Function
17
Warning
Flashes in yellow in the following events:
■ Maintenance work due
■ Warning message
Continuous yellow light after acknowledgement.
18
Controller voltage
Continuous green light when voltage is applied to the controller.
19 LOAD Continuous green light when the machine is running in LOAD.
20
IDLE
Continuous green light when the machine is running in IDLE.
Flashes when the «LOAD/IDLE» toggle key is pressed.
21 Remote control Continuous green light when the machine is in remote control.
22
Timer control
Continuous green light when the machine is controlled by the tim‐
er.
23
ON
Continuous green light when the machine switched on.
Tab. 24 Indicators
RFID sensor field
RFID is the abbreviation for “Radio Frequency IDentification” and enables the identification of per‐
sons or objects.
Placing a suitable transponder in front of the RFID sensor field of the controller will automatically
activate the communication between transponder and SIGMA CONTROL 2 .
A suitable transponder is the KAESER RFID Equipment Card. Two of them have been provided
with the machine.
Typical application:
■ Users log on to the machine.
(no manual input of the password required.)
The KAESER RFID Equipment Cards are carefully packed in a plastic sleeve.
This plastic sleeve is attached to the rear of the controller inside the control cabinet.
Fig. 6 RFID sensor field
Position Name Function
24
RFID RFID sensor field for communication with a suitable RFID transponder
Tab. 25 RFID sensor field
4 Design and Function
4.2 Operating panel
9_9450 03USE
Service manual Controller
SIGMA CONTROL 2 SCREW FLUID 1.1.3
13