KAESER ESD 352 SFC, Техническая документация инструкция

Страница: 189 / 413

9 Outputting important operational states of the ma‐
chine
Important operational machine states can be assigned via floating relay contacts as a binary signal
on the outputs DOR 1.05 – DOR 1.07. Further outputs are optionally available. You can assign ev‐
ery output only once.
Precondition Access level 2 is activated.
The display shows the operating mode.
Configuration ➙ I/O Periphery ➙ DO Functions menu
1. Press «Enter».
The main menu is displayed.
2. Select the
< Configuration ➙ I/O periphery ➙ DO functions > menu.
A list of available messages and their assigned outputs is displayed.
Controller on line is displayed as being active.
3. Select the required message with the «UP» or «DOWN» keys.
8 9 p s i 0 8 : 1 5 1 7 6 ° F
5.7.1 DO functions
Menu
Controller on
Active line
DOR 1.05 ☐ ¦ Logic : +
DOT 1.02 ☐ ¦ Logic : +
Compressor on
DOR 1.03 ☐ ¦ Logic : +
DOT 1.02 ☐ ¦ Logic : +
Assigning a message to an output
1. Press «Enter» to switch into setting mode.
The display flashes.
2. Select a free output with the «UP» or «DOWN» key.
3. Press «Enter» to accept the setting.
A message is now sent via the assigned output.
4. Press «Esc» repeatedly to return to the main menu.
Further information See chapter 7.11 for the configuration and use of the controller's inputs and outputs.
9 Outputting important operational states of the machine
14
Quick user guide Controller
SIGMA CONTROL 2 SCREW FLUID 1.1.3
9_9450 03 USE