Kaden KS09, Руководство по установке

Страница: 22 / 36

22 | Kaden Installation Manual
Step 3: Anchor outdoor unit
The outdoor unit can be anchored to the ground or to a
wall-mounted bracket.
Unit mounting dimensions
The following is a list of different outdoor unit sizes and the
distance between their mounting feet.
Prepare the installation base of the unit according to the
dimensions below.
Model
Outdoor Unit Dimensions (mm)
W x H x D
Mounting Dimensions
Distance A (mm) Distance B (mm)
KS09, KS12 800x554x333 (31.5”x21.8”x13.1”) 514 (20.24”) 340 (13.39”)
KS18 845x702x363 (33.25”x27.63”x14.29”) 540 (21.26”) 350 (13.8”)
KS24, KS28 946x810x410 (37.21”x31.9”x16.14”) 673 (26.5”) 403 (15.87”)
W
A
B
D
Air outlet
Air inlet
Air inlet
Fig. 4.5
If you will install the unit on the ground or on a concrete
mounting platform, do the following:
1. Mark the positions for four expansion bolts based on
dimensions in the Unit Mounting Dimensions chart.
2. Pre-drill holes for expansion bolts.
3. Clean concrete dust away from holes.
4. Place a nut on the end of each expansion bolt.
5. Hammer expansion bolts into the pre-drilled holes.
6. Remove the nuts from expansion bolts, and place outdoor
unit on bolts.
7. Put washer on each expansion bolt, then replace the nuts.
8. Using a wrench, tighten each nut until snug.
WARNING
When drilling into concrete, eye protection
is recommended at all times.
J3387_Kaden_Installer_Manual_050917.indd 22 5/09/2017 9:08 AM