Kaba Saflok SYSTEM 6000, Справочное руководство

Страница: 19 / 132

System 6000
TM
Reference Manual_Section 2
© SAFLOK
Page 11 of 26 06_11
4. Click the Task Data tab. Select either Saflok 6000 or
Saflok Messenger. Set the Archive Record
Threshold and Archive Month Count for each
database and click Apply .
o
Archive record threshold is one of the criteria Scheduler uses to determine if an Archive is necessary.
The default setting is 20000. In this case, when Scheduler scans the Transaction Log file and it has
more than 20000 transaction records, it will also check the Archive Month Count to see if it should
create an archive. If there are less than 20000 records in the database, it will not perform an archive.
o
Archive Month Count is the number of months that you want to keep in the current log file; anything
older than this setting will get archived. The default setting is 3 (only 1, 2, or 3 months selected). In
this case, if there are over 20000 transaction records and they are older than 3 months, Scheduler will
create an archive file.
o
If there are 20000 records, and they are all under 3 months old, an archive will not be created.
Similarly, if the records are older than 3 months but there are fewer than 20000, an archive will not
be created.
o
The recommended settings for the Messenger database are 10000 records and 1 Month. As there are
typically many hundreds or thousands of records per day that are stored in the Messenger
transaction log file (Saflokmsgrlogv2.gdb).
o
Once Scheduler has determined that an archive needs to be performed, it will archive the records from
the Safloklogv2.gdb file, and put them into an ARC_SAFLOKLOG####.gdb file.
o
Once an archive file has been created, and a transaction history report is run that spans into the
archived records, you will get 2 or more different reports, illustrated below. The top report would be
from the Current database, and the second report is from the archive.