Kaba Saflok SYSTEM 6000, Справочное руководство, Страница: 101 / 132

System 6000
TM
Reference Manual_Section 6
© SAFLOK
Page 2 of 34
06/11
6.1 Light Indicators (continued)
Yellow Light
1. Flashing Yellow Light (12 Times)
This flashing yellow light indicates that a correct keycard has been used in the lock, but the dead bolt or privacy
button/switch has been set from inside the room.
2. Fast Flashing Yellow Light (8 Times)
This fast flashing yellow light indicates that a correct keycard has been used in the lock, but entry is denied for
one of the following reasons:
a. The door has been electronically double locked by an electronic lockout keycard.
b. The Guest, Alternate Guest, or Failsafe keycard has been automatically inhibited, or the lock has
been inhibited by the inhibit key.
c. The keycard was programmed with an expiration date and time. The light indicates that the
keycard was used after this expiration date and time.
d. The Master keycard was programmed to work only during certain shift hours of the day, or to
work only on certain days of the week. The light indicates that the keycard used was not
programmed for that shift or day.
3. Two Yellow Flashes
Two yellow flashes indicate that an incorrect keycard was used in the lock.
4. One Yellow before Green or Yellow
The master keycard being used is about to expire. This light will appear seven days prior to the expiration date.
Red Light
Alternately Flashing Red Light
A red light will flash alternately with another light when the lock batteries are low.
Simultaneously Flashing Red Light
A red light will flash simultaneously with another light when the clock in the lock needs to be reset.
Red Flash (1 or 2 Times)
If a red light flashes one or two times when a keycard is used in the lock, the keycard was used improperly
(upside down, backwards, or not removed). If a red light flashes one or two times when no keycard is used, the
key switch is stuck.
Yellow and Red Lights
Two yellow and red flashes indicate that the lock was unable to properly read the lock code on the keycard.
No Lights
If no lights appear when a keycard is used:
1. An invalid key shutdown is in effect.
2. The key switch is broken.
3. The lock batteries are dead.