Kaba Saflok SYSTEM 6000, Справочное руководство

Страница: 102 / 132

System 6000
TM
Reference Manual_Section 6
© SAFLOK
Page 3 of 34
06/11
6.2 Special Function Light Indicators
Resequence Keycard
The Resequence keycard is used to update the sequence number stored in the lock’s memory when the number of
new keycards made but not used in the lock exceeds the programmed sequence range for that keycard. When a
Resequence keycard is used, the following lights will appear:
•
Flashing Green and Yellow (6 times)
These lights indicate that the Resequence Keycard worked properly.
•
Flashing Yellow (6 times)
This light indicates that the lock was not out of sequence.
When using a Resequence keycard for guest levels, if a red light flashes one time before the flashing green/or
yellow lights, a new Guest keycard must be made.
Inhibit Keycard
The Inhibit keycard affects the Guest, Alternate Guest and Failsafe keycards and prevents the current keycards for
these keycard types from opening the lock. The purpose is to prevent guests who have checked out of the room
from later re ‐ entering the room if their keycard has not expired. It is generally used after the room has been
cleaned and is ready for the next guest.
When the Inhibit keycard is used in the lock, the following lights will appear:
•
Red Flash (1) Followed by Flashing Yellow (12 Times)
These lights indicate that the Guest keycards were successfully inhibited, and the current Guest ‐ level
codes in the lock’s memory will no longer allow entry.
•
Flashing Yellow (12 Times)
This light indicates that the lock has already been inhibited.
Electronic Lockout Keycard
The Electronic Lockout keycard is used to double lock the door from the outside and prevents other keycards
(except the Security/Emergency keycard) from activating the lock. The lock can be programmed so that there is
one keycard to set the electronic lockout and a separate keycard to remove the electronic lockout, or one toggle
keycard that performs both functions.
When the Electronic Lockout keycard is used, the following lights will appear:
•
Red Flash (1) Followed by Flashing Yellow (12 Times)
These lights indicate that the electronic lockout has been set.
•
Green Flash (1) Followed by Flashing Yellow (12 Times)
These lights indicate that the electronic lockout has been removed.