JVL MAC00-EC4, Руководство пользователя

Страница: 294 / 300

294 JVL Industri Elektronik A/S - User Manual - Ethernet for MAC and MIS motors
12.4 Motor registers MISxxx
Reg Name Size Access Range Default Unit Description MacTalk
name
35 ERR_BITS 32bit R/W 0 Special Error bits:
Bit 0: General error (always set together with another
error bit)
Bit 1: Follow error
Bit 2: Output driver
Bit 3: Position Limit
Bit 4: Low bus voltage
Bit 5: Over voltage
Bit 6: Temperature >90 °C
Bit 7: Internal (Self diagnostics failed)
Bit 8: Absolute multiturn encoder lost position
Bit 9: Absolute multiturn encoder sensor counting
Bit 10: No comm. to absolute multiturn encoder
Bit 11: SSI encoder counting
Bit 12: Closed loop
Bit 13: External memory
Bit 14: Absolute single turn encoder
Bit 27: Safe Torque Off (STO)
Errors
36 WARN_BITS 32bit R/W 0 Special Warning bits:
Bit 0: Positive limit active
Bit 1: Negative limit active
Bit 2: Positive limit has been active
Bit 3: Negative limit has been active
Bit 4: Low bus voltage
Bit 5: Reserved
Bit 6: Temperature >80 °C
Bit 7: SSI encoder
Bit 8: Driver overload
Warnings
37 STARTMODE 32bit R/W 0, 1, 2, 3 0 ‐ The motor will change to this mode after power up. This
is also the mode that is used after a zero search is
completed.
See MODE_REG for a list of possible modes.
Startup mode
38 P_HOME 32bit R/W
( ‐ 2
31
) ‐ (2
31
‐ 1)
0 Steps The found zero point is offset with this value. Zero search
position
39 Reserved (intended for 64 ‐ bit P_HOME hi ‐ word)
40 V_HOME 32bit R/W ‐ 300,000 ‐ 300,000 ‐ 5000 0.01
RPM
The velocity to use during zero search. Set a negative
velocity to search in the negative direction.
Zero search
velocity
42 HOMEMODE 32bit R/W 0,13,14 0 ‐ Select the zero search that should start on power up. Zero search
mode
43 ‐
45
Reserved 32bit R/W 1 ‐ 8 0 Planned ‐ Not supported yet!
46 AbsEncPos 32bit R 0 ‐ 409,500 0 Steps The position last read from the internal magnetic
encoder. This is the absolute single ‐ turn position.
Abs. encoder
position
47 EXTENCODER 32bit R
( ‐ 2
31
) ‐ (2
31
‐ 1)
0 Counts The value from an external encoder, eg. SSI. SSI Encoder
value
48 FlexReg 32bit R ‐ 0 ‐ A mix of 16 bits from different registers. The user can set
this up.
49 ‐
64
Pn 32bit R/W
( ‐ 2
31
) ‐ (2
31
‐ 1)
0 Steps 8 position registers (odd numbered registers) Position n (Pn)