Jura Impressa F, Инструкция по эксплуатации

Страница: 13 / 52

13
1 Preparing and using for the first time
T Fill the water tank with fresh, cold water and reinsert the
tank.
SWITCH OPEN
The arrow on the switch lights up.
T
Place a receptacle under the fine foam frother and under the
coffee spout.
j T Turn the switch to the m position.
SYSTEM FILLING
, the system fills up with water.
SWITCH CLOSE
h T Turn the switch to the ° position.
The illuminated arrow on the switch goes out.
SYSTEM FILLING
, the system fills up with water.
HEATING
, the machine heats up.
RINSING
, the system is rinsed. The rinse stops automat-
ically.
READY
appears on the display. Your IMPRESSA is
ready for use.
You can find out what the water hardness is by using the Aquadur®
test strip supplied as standard.
T Hold the test strip briefly (for 1 second) under flowing water.
Shake off the water.
T Wait for about 1 minute.
T You will then be able to read the degree of water hardness
from the discolouration of the Aquadur® test strip and the
description on the packaging.
Determining the water
hardness