Jura Impressa F, Инструкция по эксплуатации

Страница: 20 / 52

20
2 Preparation
E You can also permanently set the amount of water for all spe-
ciality coffees and hot water in programming mode (see
Chapter 4 ‘Permanent settings in programming mode – Prod-
uct settings’).
To obtain a perfect water flow, use the hot-water nozzle. You can find
the hot-water nozzle under the cover of the storage compartment.
There is a danger of scalding from hot water splashes.
T
Avoid direct contact with the skin.
Example: Proceed as follows to prepare hot water.
Precondition:
READY
is displayed.
T Carefully remove the fine foam frother from the Connector
System
©
by twisting slightly.
T Open the storage compartment cover, take out the hot-
water nozzle and close the cover again.
T Attach the hot-water nozzle to the connector.
T
Place a cup under the hot-water nozzle.
§ T
Press the Hot Water button.
SWITCH OPEN
The arrow on the switch lights up.
j T
Turn the switch to the
m
position.
WATER PORTION
, the preset amount of water flows into
the cup. Preparation stops automatically.
SWITCH CLOSE
h T Turn the switch to the ° position.
The illuminated arrow on the switch goes out.
READY
appears on the display.
E You can also prepare any amount of hot water you require: To
do this, turn the switch to the
m position. When there is
enough water in the cup, turn the switch back to the ° posi-
tion.
Hot water
J CAUTION