Jura Impressa F, Инструкция по эксплуатации

Страница: 19 / 52

19
2 Preparation
T Open the cover of the filler funnel for ground coffee.
FILL PRE-GROUND
T
Place one level measuring spoon of ground coffee into the
filler funnel.
T
Close the cover of the filler funnel.
SELECT BUTTON
< T Press the Espresso button.
Preparation starts.
1 ESPRESSO
, the preset amount of
water for espresso flows into the cup.
Preparation stops automatically.
READY
appears on the
display.
It is easy to make permanent settings for the amount of water for all
speciality coffees and hot water according to the cup size. Adjust the
amount once as shown in the following example. Every time you
prepare a drink in the future, this amount of water will be dispensed.
The permanent settings for adapting the amount of water to the cup
size for all speciality coffees and hot water follow this model.
Example: Proceed as follows to permanently set the amount of
water for one coffee.
Precondition:
READY
is displayed.
T Place a cup under the coffee spout.
> T Press and hold the Coffee button.
1 COFFEE
> T Hold the Coffee button down until
ENOUGH COFFEE ?
appears.
> T
Release the Coffee button.
Preparation starts and the coffee flows into the cup.
T Press any button as soon as there is sufficient coffee in the
cup.
Preparation stops.
OK
appears briefly on the display. The set
amount of water for one coffee is permanently stored.
READY
appears on the display.
E
You can alter this setting at any time by repeating the above
procedure.
Permanently setting the
amount of water for the
cup size