Jura Impressa F, Инструкция по эксплуатации

Страница: 40 / 52

40
5 Maintenance
If the descaling operation is interrupted, there may be damage to
the machine.
T Allow the descaling programme to run to the end.
If the descaling agent comes into contact with sensitive surfaces
(e.g. marble), damage cannot be ruled out.
T
Clean up any splashes immediately.
E The descaling programme lasts approximately 45 minutes.
E JURA descaling tablets are available from specialised dealers.
E If you use a CLARIS Blue filter cartridge and this is activated,
you will not be prompted to descale.
Precondition:
READY
/
DESCALE
is displayed and the Mainte-
nance button c lights up.
c T Press the Maintenance button.
EMPTY TRAY
T Empty the drip tray and coffee grounds container and put
them back into the machine.
AGENT IN TANK
T Remove and empty the water tank.
T Completely dissolve the contents of one blister (3 JURA des-
caling tablets) in a receptacle holding 500 ml of water. This
may take several minutes.
T
Pour the solution into the empty water tank and insert it into
the machine.
SWITCH OPEN
The arrow on the switch lights up.
T Carefully remove the fine foam frother from the Connector
System
©
by twisting slightly.
T Place a receptacle (at least 500 ml) under the Connector
System
©
.
j T Turn the switch to the m position.
DESCALING
, water flows out of the Connector System
©
several times. The Maintenance button c flashes during the
descaling operation.
The operation is interrupted,
SWITCH CLOSE
.
CAUTION
CAUTION