Jura Impressa F, Инструкция по эксплуатации

Страница: 25 / 52

25
4 Permanent settings in programming mode
g T Turn the Rotary Switch until
BUTTONS
is displayed.
k T
Press the Rotary Switch to enter the programme item.
SELECT BUTTON
E Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
E To change the setting for a double product, press the corre-
sponding symbol twice within 2 seconds.
> T Press the Coffee button.
1 COFFEE
appears briefly on the display.
VOLUME
g T Turn the Rotary Switch until
STRENGTH
is displayed.
k T Press the Rotary Switch to enter the programme item.
NORMAL
g T
Turn the Rotary Switch until
STRONG
is displayed.
k T
Press the Rotary Switch to confirm the setting.
OK
appears briefly on the display.
STRENGTH
g T Turn the Rotary Switch until
EXIT
is displayed.
k T Press the Rotary Switch to exit the programme item.
BUTTONS
g T Turn the Rotary Switch until
EXIT
is displayed.
k T Press the Rotary Switch to exit programming mode.
READY
E If you are using the CLARIS Blue filter cartridge and have acti-
vated it, it is not possible to set the water hardness.
The harder the water is, the more frequently the IMPRESSA needs to
be descaled. It is therefore important to set the water hardness accu-
rately.
The water hardness can be adjusted on a continuous scale between
1° dH and 30° dH.
Example: Proceed as follows to change the water hardness setting
from
16 °dH
to
25 °dH
.
Precondition:
READY
is displayed.
k T Press and hold the Rotary Switch until
RINSE
appears.
g T Turn the Rotary Switch until
HARDNESS
is displayed.
Setting the water
hardness