Jura Impressa F, Инструкция по эксплуатации

Страница: 30 / 52

30
4 Permanent settings in programming mode
E The maintenance status can also be displayed in addition to
the number of performed maintenance programmes. The bar
shows the current maintenance status. When the bar is com-
pletely filled, your IMPRESSA will request the respective main-
tenance programme.
k T Press the Rotary Switch to exit the programme item.
COUNTER
E Turn the Rotary Switch g to view additional information.
g T
Turn the Rotary Switch until
EXIT
is displayed.
k T
Press the Rotary Switch to exit the programme item.
INFO
g T
Turn the Rotary Switch until
EXIT
is displayed.
k T Press the Rotary Switch to exit programming mode.
READY
In the programme item
DISPLAY
you can select the unit used for
the amount of water.
Example: Proceed as follows to change the unit for the amount of
water from
ML
to
OZ
.
Precondition:
READY
is displayed.
k T Press and hold the Rotary Switch until
RINSE
appears.
g T Turn the Rotary Switch until
DISPLAY
is displayed.
k T Press the Rotary Switch to enter the programme item.
ML
g T Turn the Rotary Switch until
OZ
is displayed.
k T Press the Rotary Switch to confirm the setting.
OK
appears briefly on the display.
DISPLAY
g T
Turn the Rotary Switch until
EXIT
is displayed.
k T
Press the Rotary Switch to exit programming mode.
READY
Unit for amount of water