Jura Impressa F, Инструкция по эксплуатации

Страница: 36 / 52

36
5 Maintenance
Your IMPRESSA no longer has to be descaled if you are using the
CLARIS Blue filter cartridge. If you did not activate the filter cartridge
the first time you used the machine, you can do this now as follows.
E Perform the ‘inserting the filter’ operation without any inter-
ruptions. This will ensure that your IMPRESSA always produces
its best.
Precondition:
READY
is displayed.
k T Press and hold the Rotary Switch until
RINSE
appears.
g T Turn the Rotary Switch until
FILTER -
is displayed.
k T Press the Rotary Switch to enter the programme item.
NO
g T Turn the Rotary Switch until
YES
is displayed.
k T Press the Rotary Switch to confirm the setting.
OK
appears briefly on the display.
FILTER INSERT
T Remove and empty the water tank.
T Open the filter holder.
T Remove the CLARIS Blue filter cartridge from the Welcome
Pack.
T
Insert the CLARIS Blue filter cartridge into the water tank,
exerting slight pressure.
T Close the filter holder. It will click into place audibly.
E After two months, the filter will cease to work. Set the date on
the date plate on the filter holder in the water tank.
T Fill the water tank with fresh, cold water and reinsert the
tank.
T Place a receptacle (at least 300 ml) under the fine foam
frother.
k T
Press the Rotary Switch.
SWITCH OPEN
The arrow on the switch lights up.
j T
Turn the switch to the
m
position.
FILTER RINSING
, water flows out of the fine foam
frother.
Inserting and activating
the filter