Jura Impressa F, Инструкция по эксплуатации

Страница: 17 / 52

17
2 Preparation
h T Turn the switch to the ° position.
The illuminated arrow on the switch goes out.
CAPPUCCINO
appears on the display.
Coffee preparation starts. The preset amount of water for
espresso flows into the cup.
Preparation stops automatically.
READY
appears on the
display.
To ensure that the fine foam frother always works properly, you must
clean it
daily
when you have been preparing milk (see Chapter 5
‘Maintenance – Cleaning the fine foam frother’). Your IMPRESSA will
not prompt you to clean the fine foam frother.
E This chapter applies to the professional fine foam frother and
the fine foam frother.
E With the professional fine foam frother, available as an
optional accessory, you can also prepare hot milk.
Example: Proceed as follows to prepare milk foam.
Precondition:
READY
is displayed.
T Remove the protective cover from the fine foam frother.
T Connect the milk pipe to the fine foam frother. Use the short
pipe for a milk container and the long pipe for a milk carton.
T Connect the other end of the milk pipe to a milk container
or immerse it in a milk carton.
T
Place a cup under the fine foam frother. (Figure: Optional
JURA Cool Control Basic 0.6 l)
E Ensure that the filling height of the milk is no higher than the
milk pipe connection on the fine foam frother.
E
If you are using the
professional fine foam frother,
turn the
selector switch to the Milk Foam position
é
.
n T Press the Steam button.
HEATING
/
STEAM
As soon as the machine has heated up,
READY
/
STEAM
appears.
The arrow on the switch lights up.
Milk foam