Juniper NetScreen-5000 Series, Руководство по установке и настройке

Страница: 62 / 68

NetScreen-5000 Series Hardware Installation and Configuration Guide
62 „
Module LED Descriptions
Table 16 details the ports on the 5000-8G, 5000-8G2 and 5000-8G2-G4 Secure Port
Modules (SPMs).
Module LED Descriptions
This section provides descriptions of the LEDs on NetScreen-5000 Series modules.
Two types of LEDs exist on the modules:
„ Status LEDs. These LEDs reflect certain conditions that exist on the system at
large and do not explicitly refer to a given port.
„ Port LEDs. These LEDs reflect basic conditions (for example, a link connection
status) that exist for a specific port.
Status LED States
This section describes Status LED states on all modules.
Interpreting Status LEDs for the Management Modules
The Status LEDs indicate whether the management module is operating properly.
Table 17 describes the status possibilities for each.
Table 16: NetScreen-5000 Series Secure Port Module Ports
SPM Type Port Description Type Speed/Protocol
5000-8G Network Ports 1-8 Eight 1 Gigabit ports with an aggregate
throughput of 4Gbps. SFP 1 Gbps/Gigabit Ethernet
5000-8G2 Network ports 1
through 8 Eight 2-Gigabit ports with an aggregate
throughput of 8 Gbps. SFP 2 Gbps/Gigabit Ethernet
5000-8G2-G4 Network ports 1
through 8 Eight 2-Gigabit ports with an aggregate
throughput of 8 Gbps. SFP 2 Gbps/Gigabit Ethernet
5000-2G24FE Network ports 1 and
2 Two high-speed network ports for general
connection to the network. SFP 1 Gbps/Gigabit Ethernet
Network ports 3
through 26 Twenty-four network ports for general
connection to the network. RJ-45 10/100 Mbps/Ethernet
5000-2XGE Network ports 1 and
2 Two 10-Gigabit Ethernet XFPs with a
throughput of 10 Gbps. XFP 10 Gbps/Gigabit Ethernet
5000-2XGE-G4 Network ports 1 and
2 Two 10-Gigabit Ethernet XFPs with a
throughput of 10 Gbps. XFP 10 Gbps/Gigabit Ethernet
Table 17: Management Module Status LEDs (Page 1 of 2)
LED Color Meaning
CPU
Utilization Green Consists of an array of five LEDs that indicate the current level of CPU utilization. Utilization is
defined as the amount of traffic detected on the device at any given time. The CPU utilization
LEDs represent the following percentages of possible utilization: 5%, 10%, 25%, 50%, and
90%.
Off When all are off, indicates less than 5 percent CPU use.