Juniper NetScreen-5000 Series, Руководство по установке и настройке

Страница: 6 / 68

NetScreen-5000 Series Hardware Installation and Configuration Guide
6 „
Guide Organization
Guide Organization
This manual contains the following sections:
„ Chapter 1, “Overview,” provides a detailed overview of the system, its modules,
Fast Ethernet (FE) connectors and Small Form factor Pluggable (SFP) sockets,
power supplies, and fan tray.
„ Chapter 2, “Installing the Device,” details how to rack mount the
NetScreen-5000 Series, connect the power supplies, and connect the modules
to the network in addition to providing desktop site requirements and
guidelines for rack mounting.
„ Chapter 3, “Configuring the Device,” details how to obtain an IP address for an
interface on one of the modules and how to aggregate ports on one of the
modules.
„
Chapter 4, “Servicing the Device,” provides procedures on how to replace your
module and power supplies.
„ Appendix A, “Specifications,” provides a list of physical specifications about the
NetScreen-5000 Series, the modules, and power supplies.
„ Appendix B, “Port Descriptions and LED Status,” provides descriptions of port
and LED behavior.
Web User Interface Conventions
In the Web user interface (WebUI), the set of instructions for each task is divided
into navigational path and configuration settings. To open a WebUI page where you
can enter configuration settings, you navigate to it by clicking on a menu item in
the navigation tree on the left side of the screen, then on subsequent items. As you
proceed, your navigation path appears at the top of the screen, each page separated
by angle brackets.
The following example shows the WebUI path and parameters for defining an
address:
Policy > Policy Elements > Addresses > List > New: Enter the following, then
click
OK :
Address Name: addr_1
IP Address/Domain Name:
IP/Netmask: (select), 10.2.2.5/32
Zone: Untrust
To open online Help for configuration settings, click on the question mark (?) in the
upper left of the screen.
The navigation tree also provides a Help > Config Guide configuration page to help
you configure security policies and Internet Protocol Security (IPSec). Select an
option from the dropdown menu and follow the instructions on the page. Click
the
? character in the upper left for Online Help on the Config Guide.