Juniper NetScreen-5000 Series, Руководство по установке и настройке

Страница: 29 / 68

„ 29
Chapter 3
Configuring the Device
This chapter describes how to perform initial configuration on the NetScreen-5000
Series once you have mounted it in a rack or desktop, plugged in the necessary
cables, and turned the power on. Topics in this chapter include:
„ “Operational Modes” on page 30
„ “Transparent Mode” on page 30
„ “Route Mode” on page 30
„ “NetScreen-5000 Interfaces” on page 31
„ “NetScreen-5200 Interfaces” on page 31
„ “NetScreen-5400 Interfaces” on page 32
„ “Configurable Interfaces” on page 33
„ “Performing Initial Connection and Configuration” on page 33
„ “Establishing a Terminal Emulator Connection” on page 33
„ “Upgrading the Firmware During the Startup Process” on page 35
„ “Changing Your Admin Name and Password” on page 36
„ “Setting Port and Interface IP Addresses” on page 36
„ “Configuring the Device for Telnet and WebUI Sessions” on page 38
„ “Starting a Console Session Using Telnet” on page 38
„ “Starting a Console Session Using Dialup” on page 39
„ “Establishing a GUI Management Session” on page 39