Juniper NetScreen-5000 Series, Руководство по установке и настройке

Страница: 16 / 68

NetScreen-5000 Series Hardware Installation and Configuration Guide
16 „
NetScreen-5000 Modules
(For details on connecting or removing a SFP transceivers and connecting and
disconnecting Gigabit Ethernet cables, see “Servicing the Device” on page 45.)
The 5000-8G SPM provides port Link and Activity LEDs in addition to Power and
Status LEDs.
Figure 6: 5000-8G Secure Port Module (5000-8G2 and 5000-8G2-G4 Similar)
5000-2XGE and 5000-2XGE-G4 SPMs
The 5000-2XGE and 5000-2XGE-G4 SPMs provide two 10-Gigabit XFP sockets for
hot-swappable transceivers. You cannot mix this SPM with the 5000-8G or
5000-2G24FE SPMs.
(For details on inserting or removing SFP transceivesr and connecting and
disconnecting Gigabit Ethernet cables, see “Servicing the Device” on page 45.)
The 5000-2XGE SPM provides port Link and Activity LEDs in addition to Power and
Status LEDs.
Table 4: Capacities and Management Modules, 5000-8G, 5000-8G2 and 5000-8G2-G4
SPMs
SPM Type Firewall
Capacity VPN
Capacity Interface Aggregation Management module
5000-8G 4 Gbps 2 Gbps 4 aggregate interfaces of
up to 2 ports each 5000-M or 5000-M2
5000-8G2 8 Gbps 4 Gbps 4 aggregate interfaces of
up to 2 ports each 5000-M2 Only
5000-8G2-G4 8 Gbps 4 Gbps 4 aggregate interfaces of
up to 4 ports each 5000-MGT3 Only
Status LED Link LED
Transmit/Receive LED
Eight 1-Gigabit SFP Ports
Power LED
Table 5: Capacities and Management Modules, 5000-2XGE and 5000-2XGE-G4 SPMs
SPM Type Firewall Capacity VPN Capacity Management module
5000-2XGE 10 Gbps 5 Gbps 5000-M2 Only
5000-2XGE-G4 10 Gbps 5 Gbps 5000-MGT3 Only