Juniper NetScreen-5000 Series, Руководство по установке и настройке

Страница: 40 / 68

NetScreen-5000 Series Hardware Installation and Configuration Guide
40 „
Configuring the Chassis Alarm
3. Enter netscreen in both the Admin Name and Password fields, then click Login .
(Use lowercase letters only. The Admin Name and Password fields are both
case-sensitive.)
The ScreenOS WebUI application window appears.
Configuring the Chassis Alarm
The NetScreen-5000 Series system allows you to configure the chassis alarm, an
audible warning that sounds when a system failure or hazardous event occurs. To
determine which failures and events trigger the chassis alarm:
1. Configure the audible alarms with the following command:
set chassis audible-alarm string
where string can be any of the following keywords:
2. After configuring the alarm, it is advisable to view alarm environment
information with the following command:
get chassis
Configuring Jumbo Frames
The 5000-8G2 and 5000-2XGE SPMs support jumbo frames that are up to 9,830
bytes. To set jumbo frames, use the
set environment max-frame-size=9830 CLI
command. You must reboot the system before this feature can take effect.
all Enables all chassis alarms.
battery Sets the chassis alarm to sound when a battery fails.
fan-failed Sets the chassis alarm to sound when a fan fails.
power-failed Sets the chassis alarm to sound when a power supply fails.
temperature Sets the chassis alarm to sound when the temperature goes outside of the
acceptable range.