Juniper JUNOSe 10.3.2, Руководство по выпуску

Страница: 94 / 118

JunosE 10.3.2 Release Notes
86 „
ERX310, ERX7xx, and ERX14xx System Maximums
Tunneling Maximums
Table 6 lists tunneling maximums for the ERX routers. The following notes are
referred to in Table 6:
1. The SM supports any combination of DVMRP, GRE, and L2TP tunnels up to a
maximum of 8000 tunnels; however, no more than 4000 tunnels can be
DVMRP or GRE tunnels in any combination. The ISM supports any combination
of DVMRP, GRE, and L2TP tunnels over IPSec, up to a maximum of 5000
tunnels; however, no more than 4000 tunnels can be DVMRP or GRE tunnels.
2. You can have no more than 8000 L2TP/IPSec sessions per chassis.
3. For more information about supported L2TP sessions and tunnels, see JunosE
Broadband Access Configuration Guide, Chapter 11, L2TP Overview .
Table 6: Tunneling Maximums
Feature ERX310
ERX705 and
ERX710
ERX1410 ERX1440
DVMRP (IP-in-IP) tunnels per chassis 4000 4000 4000 4000
DVMRP (IP-in-IP) tunnels per line module
(See Note 1 on page 86.)
GE-2 with shared tunnel-server ports provisioned 4000 – – 4000
GE-HDE with shared tunnel-server ports provisioned 4000 – – 4000
IPSec Service Module (DVMRP/IPSec tunnels) 4000 4000 4000 4000
Service Module (SM) 4000 4000 4000 4000
GRE tunnels per chassis 4000 4000 4000 4000
GRE tunnels per line module
(See Note 1 on page 86.)
GE-2 with shared tunnel-server ports provisioned 4000 – – 4000
GE-HDE with shared tunnel-server ports provisioned 4000 – – 4000
IPSec Service Module (GRE/IPSec tunnels) 4000 4000 4000 4000
Service Module (SM) 4000 4000 4000 4000
IPSec manual secure tunnels per chassis 256 256 256 256
IPSec transform sets per chassis 1000 1000 1000 1000
IPSec transforms per transform set 6 6 6 6
IPSec tunnels per chassis 10,000 10,000 10,000 20,000