Known Behavior
31
Release 10.3.2
SNMP
SNMP MIBs
Information about all the SNMP MIBs (both standard and proprietary) that the
router supports in this release is available in the MIB directory in the
SW_Image_CD-2 folder of the JunosE Software image bundle, which you
downloaded from the Juniper Networks website, that contains the release file
for E120 and E320 routers. .
Some Juniper Networks SNMPv1-formatted traps contain an incorrect object
identifier (OID) in the SNMPv1-Trap-PDU enterprise field. An SNMPv2 trap is
typically identified by an OID that ends in the form ...x.y.z.0.n. This OID
appears, in full, as the value of the snmpTrapOID.0 object in the varbind list of
an SNMPv2-formatted trap. In the corresponding SNMPv1-formatted trap, this
OID is broken down into subcomponents that fill the SNMPv1-Trap-PDU
enterprise field (...x.y.z) and specific trap number field (n); the zero is unused.
The SNMPv1-formatted versions of the following Juniper Networks traps
incorrectly contain ...x.y.z.0 in the SNMPv1-Trap-PDU enterprise field. That is, a
zero is mistakenly appended to the correct enterprise OID value
Work-around:
Use the OIDs that the SNMP agent sends.
SSH
If the SRP module restarts when SSH is configured in a VR other than default,
SSH can sometimes become disabled. This happens if SSH attempts to bind
with a VR before the VR comes back up after the restart. In this event, a
warning message is generated to alert you to the fact that SSH is disabled in
that VR. You must manually re-enable SSH either by accessing the console VTY
or creating a Telnet session to the router.
Trap Name
Expected Enterprise OID
Enterprise OID Sent by SNMP Agent
junidApsEventSwitchover
.1.3.6.1.4.1.4874.3.2.2.1.2
.1.3.6.1.4.1.4874.3.2.2.1.2.0
junidApsEventModeMismatch
.1.3.6.1.4.1.4874.3.2.2.1.2
.1.3.6.1.4.1.4874.3.2.2.1.2.0
junidApsEventChannelMismatch
.1.3.6.1.4.1.4874.3.2.2.1.2
.1.3.6.1.4.1.4874.3.2.2.1.2.0
junidApsEventPSBF
.1.3.6.1.4.1.4874.3.2.2.1.2
.1.3.6.1.4.1.4874.3.2.2.1.2.0
junidApsEventFEPLF
.1.3.6.1.4.1.4874.3.2.2.1.2
.1.3.6.1.4.1.4874.3.2.2.1.2.0
juniAddressPoolHighAddrUtil
.1.3.6.1.4.1.4874.2.2.21.3
.1.3.6.1.4.1.4874.2.2.21.3.0
juniAddressPoolAbatedAddrUtil
.1.3.6.1.4.1.4874.2.2.21.3
.1.3.6.1.4.1.4874.2.2.21.3.0
juniAddressPoolNoAddresses
.1.3.6.1.4.1.4874.2.2.21.3
.1.3.6.1.4.1.4874.2.2.21.3.0
juniDhcpLocalServerPoolHighAddrUtil
.1.3.6.1.4.1.4874.2.2.22.3
.1.3.6.1.4.1.4874.2.2.22.3.0
juniDhcpLocalServerPoolAbatedAddrUtil
.1.3.6.1.4.1.4874.2.2.22.3
.1.3.6.1.4.1.4874.2.2.22.3.0
juniDhcpLocalServerPoolNoAddresses
.1.3.6.1.4.1.4874.2.2.22.3
.1.3.6.1.4.1.4874.2.2.22.3.0
pimNeighborLoss
.1.3.6.1.3.61.1
.1.3.6.1.3.61.1.0
Содержание JUNOSe 10.3.2
Страница 8: ...viii Table of Contents JunosE 10 3 2 Release Notes ...
Страница 76: ...JunosE 10 3 2 Release Notes 68 Errata ...