Juniper JUNOSe 10.3.2, Руководство по выпуску

Страница: 77 / 118

„ 69
Appendix A
System Maximums
This appendix presents current system maximums for various E Series hardware
configurations. An E Series router does not simultaneously support all maximum
configurations.
For some entries, early field trial (EFT) values are presented in addition to supported
values. These values have not been fully qualified by Juniper Networks and are
mentioned only for field test purposes in this release. EFT values are enclosed
within parentheses with an EFT designation; for example, (96,000 EFT).
Modules referred to in the tables are identified by their physical label. For module
specifications, including their identifying labels, see
ERX Module Guide, Table 1,
Module Combinations and E120 and E320 Module Guide, Table 1, Modules and IOAs .
System Maximums for ERX310,
ERX7xx, and ERX14xx
Section
General router values General System Maximums on page 70
Physical layer values Physical and Logical Density Maximums on page 71
Link layer values Link Layer Maximums on page 74
Routing protocol and performance values Routing Protocol Maximums on page 79
Policy and QoS values Policy and QoS Maximums on page 83
Tunneling values Tunneling Maximums on page 86
Subscriber management values Subscriber Management Maximums on page 88
System Maximums for E120 and E320
Routers
Section
General router values General System Maximums on page 91
Physical layer values Physical and Logical Density Maximums on page 92
Link layer values Link Layer Maximums on page 94
Routing protocol and performance values Routing Protocol Maximums on page 100
Policy and QoS values Policy and QoS Maximums on page 103
Tunneling values Tunneling Maximums on page 107
Subscriber management values Subscriber Management Maximums on page 109