Juniper JUNOSe 10.3.2, Руководство по выпуску

Страница: 67 / 118

Errata
„ 59
Release 10.3.2
„ The Link Layer Maximums table (for the E120 and E320 routers) in Appendix A,
System Maximums , of the JunosE Release Notes , for the following releases
incorrectly stated that the maximum number of Ethernet S-VLANs per ES2-S2
10GE PR IOA with an ES2 10G LM or ES2 10G Uplink LM was 32,768:
„ Releases 10.2.0 and 10.2.1
„ Release 10.3.0
The correct limit for Ethernet S-VLANs per ES2-S2 10GE PR IOA on these LMs in
these releases is only 16,384. The increased scaling maximum of 32,768
Ethernet S-VLANs per ES2-S2 10GE PR IOA, in these releases, applies only to
the ES2 10G ADV LM.
„ The SRC Software and SDC Software section in the Subscriber Management
Maximums table (for the ERX310, ERX7xx, and ERX14xx routers) in
Appendix
A, System Maximums , of the JunosE Release Notes , for the following releases
incorrectly mentioned that the maximum number of SRC interfaces supported
on all the ERX routers was 48,000.
„ Release 9.0.3
„ Release 9.1.3
„ Releases 9.2.2 and 9.2.3
„ Releases 9.3.1 and 9.3.2
„ Releases 10.0.1 and 10.0.2
„ Releases 10.1.0, 10.1.1, and 10.1.2
„ Releases 10.2.0 and 10.2.1
„ Release 10.3.0
The correct maximum number of SRC interfaces supported on the different
ERX routers is as follows:
„ 16,000 interfaces on the ERX310 router
„ 32,000 interfaces on the ERX705 and ERX710 router
„ 32,000 interfaces on the ERX1410 router
„ 48,000 interfaces on the ERX1440 router