Juniper JUNOSe 10.3.2, Руководство по выпуску

Страница: 89 / 118

ERX310, ERX7xx, and ERX14xx System Maximums
„ 81
Appendix A: System Maximums
IS-IS adjacencies 150 150 150 150
IS-IS routes 20,000 20,000 20,000 20,000
MPLS LDP LSPs 10,000 10,000 10,000 10,000
MPLS RSVP-TE LSPs 10,000 10,000 10,000 10,000
OSPF adjacencies 1000 1000 1000 1000
OSPF routes 25,000 25,000 25,000 25,000
IPv6 routing table entries
(See Note 3 on page 79.)
50,000 50,000 50,000 50,000
J-Flow statistics
J-Flow–enabled VRs and VRFs, in any combination 16 16 16 16
Sampled interfaces per VR or VRF 32 32 32 32
Total sampled Interfaces per chassis 512 512 512 512
Martini circuits for layer 2 services over MPLS
Total Martini circuits per line module
(See Note 6 on page 79.)
8000 8000 8000 8000
Total Martini circuits per chassis
(See Note 7 on page 79.)
16,000 16,000 16,000 32,767
External Martini circuits per chassis 16,000 16,000 16,000 32,767
Internal Martini circuits (local cross-connects) per chassis 16,000 16,000 16,000 32,767
Mobile IP bindings per chassis – – – 48,000
Multicast routes (IPv4 and IPv6)
Forwarding entries [(S,G) pairs] per chassis
(See Note 8 on page 79.)
16,384 16,384 16,384 16,384
Outgoing interfaces per chassis
(See Note 9 on page 79.)
65,536 65,536 65,536 65,536
Network Address Translation (NAT)
Static translations (simple or extended) per chassis 96,000 96,000 96,000 96,000
Dynamic simple translations (NAT) per SM
(See Notes 10 and 11 on page 80.)
400,000 400,000 400,000 400,000
Dynamic extended translations (NAPT) per SM
(See Notes 10 and 11 on page 80.)
200,000 200,000 200,000 200,000
Table 4: Routing Protocol Maximums (continued)
Feature ERX310
ERX705 and
ERX710
ERX1410 ERX1440