A-29 Super Tucano 60TP 1.1 2022
24
Above: gray areas (trailing edges) on stabilizer shall not be drilLED or cut.
Above: gray areas (trailing edges) on ailerons and flaps shall not be drilLED or cut.
Ailerons:
4 simple horns with a height between 30mm to 40mm are required. The servo arms (length between
40mm to 45mm from the center to the end) must be positioned to the side of the wing root. Note that the two
sides of the wing have the same position. The horn reinforcement is centered with the line formed by the slot
where the servo arm is exposed. Distance between the center of the control arm and the hole of the horn (in
neutral position): 115mm. The servos must be screwed directly to the ribs inside the wing, which are previously
drilLED. Before definitively screwing the servos, apply a drop of medium CA glue or epoxy glue to each hole. It
