Jungheinrich 50435801, Руководство по эксплуатации

Страница: 61 / 83

0307
.GB
F 8
6 Instructions for the servicing operations
6.1 Preparing the truck for the performance of servicing and maintenance opera-
tions
All required safety measures must be taken to prevent any accidents in the course of
the servicing and maintenance operations. The following preparatory operations
must be performed:
– Park the truck and render it safe (refer to chapter E).
– Disconnect the battery plug so that the truck cannot be started by unauthorised per-
sons (refer to chapter D).
F
When work has to be performed under the raised fork or under the jacked up truck,
suitable measures must be taken to prevent any dropping, tilting or slipping of the fork
or truck. When lifting the truck, the instructions contained in chapter “Transportation
and commissioning” have to be observed.
When performing work on the parking brake, the truck must be secured against mov-
ing.
6.2 Tightening the wheel screws
The wheel screws of the drive wheel must be retightened in accordance with the serv-
icing intervals indicated in the servicing checklist.
– Position the drive wheel (3) at right angles to the longitudinal axis of the truck.
– Using a socket wrench tighten all wheel bolts (1) through the hole (2) in the skirt in
the order indicated (torque 10 / 150 Nm).
M
Remove the socket wrench from the opening (2) after the wheel nuts have been tight-
ened.
3
2
1
0307
.GB
F 8
6 Instructions for the servicing operations
6.1 Preparing the truck for the performance of servicing and maintenance opera-
tions
All required safety measures must be taken to prevent any accidents in the course of
the servicing and maintenance operations. The following preparatory operations
must be performed:
– Park the truck and render it safe (refer to chapter E).
– Disconnect the battery plug so that the truck cannot be started by unauthorised per-
sons (refer to chapter D).
F
When work has to be performed under the raised fork or under the jacked up truck,
suitable measures must be taken to prevent any dropping, tilting or slipping of the fork
or truck. When lifting the truck, the instructions contained in chapter “Transportation
and commissioning” have to be observed.
When performing work on the parking brake, the truck must be secured against mov-
ing.
6.2 Tightening the wheel screws
The wheel screws of the drive wheel must be retightened in accordance with the serv-
icing intervals indicated in the servicing checklist.
– Position the drive wheel (3) at right angles to the longitudinal axis of the truck.
– Using a socket wrench tighten all wheel bolts (1) through the hole (2) in the skirt in
the order indicated (torque 10 / 150 Nm).
M
Remove the socket wrench from the opening (2) after the wheel nuts have been tight-
ened.
3
2
1